3 Pole AC Contactor Eaton DILMT17
3 Pole AC Contactor Eaton DILMT17 17A (230V/50Hz,240V/60Hz)
3 Pole AC Contactor Eaton DILMT17 (230V 50Hz, 240V 60Hz) is a 7.5kW DIN-rail panel-mount Auxiliary Contactor Module suitable for worldwide use. The range is extremely durable, able to handle all demands, and features immunity to interference and control circuit reliability-even when used in conjunction with PLCs. Box terminals with double coupling areas give guaranteed integrity of connection while wiring different cross-sections and also reduces cabling faults. It is plug into the front of a DILMT contactor to provide additional contacts.
Electronic device which can be use to turn power on or off at a 3-phase load is 3 pole contactor. A contactor works with a relay’s working principle. The magnetic field created by giving electric to the coils. Normally open or normally closed contact outputs of relays are changeover. The contacts turn to their first position when the coil’s electric is cut off. Thus and so, the switching happens.
Contrary to single-phase power, 3-phase electric power relies on three wires. To be perfect understand it can considerable as an engine with three compartments and three pistons rotating around a crankshaft axis. Most commercial buildings use 3-phase power, which uses four wires – three live and one neutral – in an alternating current circuit. Low-power loads in this setup can rely on 120-volt wires as in a single-phase power structure.
|Coil Voltage||230Vac 50Hz, 240Vac 60Hz|
|Contact Current Rating||17A|
|Number of Poles||3|
|Power Rating||7.5 kW|
|Normal State Configuration||3N/O|
|Dimensions||30 × 15 × 20 cm|